Lactosure Eco

milkanalyzer
Ultrasonic milk analyser is used for measuring quality parameters like Fat and SNF (Solids Non Fat) of raw milk. These quality parameters determine the price of milk. Milk analysers are used in Milk societies and Dairies. When the farmers come with their milk, the society/dairy people tested the milk with the Milk analyser and compared with the rate-chart which gives the rate per litre of milk for particular Fat and SNF. So this instrument determines the rate of milk of the farmer.

Marketed By

Sri Saidhaan Distributions
Door No: 13/470 A3, Padma Complex
Mangayil School Road, Maradu
Ernakulam, Cochin-682304, India
Mob: +91 90377 77084, +91 90377 77089
Tel : +91 484 4857784
Email: info@saidhaan.com

LACTOSURE ECO DETAILS

  1. Fully indigenous Milk Analyser.
  2. World’s fastest Milk Analyser with measurement time of 27 seconds.
  3. Low maintenance cost and spares cost, timely service and ready availability of spares.
  4. Fast and accurate measurements in wide temperature range of 1˚C to 40˚C.
  5. Excellent repeatability.
  6. RS232 port for computer interfacing.
  7. Pest intrusion free design (The cabinet is fully sealed to avoid pest intrusion).
  8. Low maintenance design.   (Ideal for Indian condition)
  9. Fully Indigenous manufacturing, enabling easy availability of spare parts and proper service and maintenance. All the materials including sensors, microprocessor integrated board, pump etc. are made in-house.
  10. Services and spares at affordable rates.
  11. Splash proof cabinet design. (Water or milk if spilled over the body, will not penetrate inside the cabinet. This keeps the electronics and its sensitive components safe and intact.)
  12. Cabinet made out of plastic and stainless steel is free from corrosion.
  13. High contrast blue/green backlight 4-line large character LCD display.
  14. Easily operational switch/buttons with 4 million operational capacities.
  15. External power supply adapter to avoid power line interference and easy maintenance.
  16. Low quantity milk sample required.
  17. Facility to backup/copy/save and restore calibration and settingsin system memory and also in computer.
  18. Two modes of cleaning, namely Daily and Weekly, for better overall performance and longevity   of the equipment.
  19. Manual cleaning option using Plunger.
  1. Single sensor design with 27 seconds measurement time.
  2. Fully Indian: Fully indigenous make, selfsufficiency and ready availability of spares with very  low spare cost. Costs of spares are extremely expensive for the imported machines.
  3. No need of changing Mother board (Main board) at the time of sensor replacement.
  4. Easy sensor replacement and calibration even at customer place.
  5. Special training: Hardware and software training for dealer, for self reliance and better profit margins
  6. Pest intrusion free design (The cabinet is fully sealed to avoid pest intrusion).If the cabinet have air holes, which the pest/insects will come inside the analyser and damage the silicon tube.
  7. All mechanical parts and cabinet made out of plastic, chromium plated brass and 304 grade stainless steel (even screws) is free from corrosion.
  8. External power supply adapter to avoid power line interference and easy maintenance.
  9. Splash proof cabinet design. (Water or milk if spilled over the body, will not penetrate inside the cabinet. This keeps the electronics and its sensitive components safe and intact.
  10. 3 level password protection for easily service at site.
  11. Facility to set CLR formulaaccording to State by state.

Direct Measuring Parameters

FAT: 0.5% to 15 %   with accuracy +/-0.1%
SNF: 3%   to 15%    with accuracy +/-0.15%
Temperature : 1°C to 40°C

Calculated Parameters

CLR: 20 to 40          with accuracy +/-1
Protein: 2% to 7%    with accuracy +/-0.1
Lactose: 0.01% to 6%  with accuracy +/-0.2
Added water in Milk: 0%  to 99%   with accuracy +/-3%

Resolution

FAT, SNF, Lactose, Protein, Salts: 0.01%
Temperature : 1°C   
CLR: 0.5
Added Water: 1%

Repeatability

FAT: +/-0.07%
SNF: +/-0.1% 
CLR: +/-0.5 
Added Water: +/-2%

Milk temperature

1 to 40°C

Measurement Time

27 Sec @30°C

Sample Volume

15ml

Average speed

120 samples/hr

Number of Calibrations

3

Operation time Limit      

Continuous

Display

High contrast 4 line, 20 Character with Blue/Green Backlight

Operating Voltage

12 Volts DC (140 – 250V AC for External Adapter )

Power input

With external SMPS power supply.

Average Power

30W

Peak Power

120W

Computer Interface

RS232

Cleaning modes

Daily, Weekly

Cabinet

ABS Front and rest 304 gradeStainless Steel

Protection

Splash proof design, All mechanical parts made of304 grade S.S, Brass and ABS.

Environmental Conditions
  1. Ambient temperature 10°C  to 40°C
  2. Relative humidity 30 to 80%

Accessories
  1. AC Power adapter            -  1 No
  2.  Daily Cleaning Solution     -  1 No
  3.  Weekly Cleaning Solution  -  1 No
  4. Sample Bottle                     -   2Nos.
Specifications subject to change without prior notice by the Manufacturer